Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PMS Manuals
  4. Computer Hardware
  5. PMS-63
  6. Operation manual

PMS -63 Operation Manual

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Latest Features
:
Latest Technologies of weighing Scale Micro and ADC.
Microcontroller Based Battery Charging (Battery Life More).
PTH 300000 (Three Laces) ADC count for Utilization.
Totally Moisture Proof Designing.
Micro and ADC protects from STATICS charges.
100 Hours Battery BACK-UP.
Upgraded to pricing counting/piece counting scale.
Operation Manual for PMS-63

Advertisement

loading
Need help?

Need help?

Do you have a question about the PMS-63 and is the answer not in the manual?

Questions and answers

Summary of Contents for PMS PMS-63

  • Page 1 Operation Manual for PMS-63 Latest Features  Latest Technologies of weighing Scale Micro and ADC.  Microcontroller Based Battery Charging (Battery Life More).  PTH 300000 (Three Laces) ADC count for Utilization.  Totally Moisture Proof Designing.  Micro and ADC protects from STATICS charges.

  • Page 2: Connection Diagram

    Contents:  Connection Diagram  Led Indicators  Operations/Settings  Change firm-name  Change Parameter Settings  Check Loadcell Counts  Device Calibration  Setting up piece Counting mode  Warranty and Service Information Connection Diagram: Keypad Connections:...

  • Page 3: Led Indicators

    LoadCell Connections: L1= Black L2= Red L3= White L4= Green Power Supply, Switch and Battery Connections: P1 & P2= Input from Transformer P3 & P4= Battery Connections P5 & P6= Switch LED Indicators: S.NO. Green LED Battery charging status Red LED Remark 1 OFF Fast Battery charging...
  • Page 4 How to Change Parameter Settings Steps: Hold M+ key power = (Enter parameter setting password) MF= mode function: 1= counting 3= liter / % ( Optional) DSS= display mode: 0 = normal mode 1= power save mode. A-0 = Set time to blank the display in idle condition (0-9 Seconds) DU-0 = dummy zero: 0= without dummy zero 1= with dummy zero 2= dual accuracy (0.5/1) or (5/10)
  • Page 5 How to Calibrate the Device: Step 1: Make sure that the Machine is in weighing mode Step 2: Keep Weight on the Pan/ platform (near 30% of maximum capacity.) Step 3: Press MR Key and hold then press MODE key Step 4: Display Show PASSWAD (Enter) Step 5:...