Advertisement
Quick Links
Quick
Start
Guide
FreeSpeak II
®
1.9 beltpacks with firmware version 5.3.32.0 upwards now support Bluetooth
easily identify the Bluetooth-enabled beltpacks by checking whether the blue label is present on the bottom of
the beltpack.
This feature has two modes:
Wireless
This mode configures the beltpack to use a Bluetooth headset.
Bluetooth Listen In
This mode configures the beltpack to use a wired headset, and also a Bluetooth headset for Listen only.
Compatible Bluetooth Headsets
FreeSpeak II beltpacks support all Bluetooth headsets with an HFP (Hands Free Profile, supplied with a
microphone) from version 4.2 to 5.1.
FreeSpeak II beltpacks do not support Bluetooth headsets with an A2DP profile (streaming profile, headset with
no microphone).
Using the beltpack menus
PUB-00243 Rev A
October 16, 2023
FreeSpeak II 1.9 Beltpack
with Bluetooth
®
headsets. You can
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for HME Clear-Com FreeSpeak II 1.9 Beltpack with Bluetooth
- Page 1 FreeSpeak II 1.9 Beltpack with Bluetooth Quick Start Guide FreeSpeak II ® 1.9 beltpacks with firmware version 5.3.32.0 upwards now support Bluetooth ® headsets. You can easily identify the Bluetooth-enabled beltpacks by checking whether the blue label is present on the bottom of the beltpack.
- Page 2 Bluetooth > Devices to connect (Step 6). Press button C to leave the menu screen. Note: The beltpack will automatically connect to the last connected headset on boot up. PUB-00243 Rev A October 16, 2023 Copyright © 2023 HME Clear-Com Ltd. All rights reserved.
- Page 3 For beltpack sidetone settings to remain when beltpacks are rebooted, you need to enable local settings for each beltpack role. Do this in the configuration software. FSII Base CCM > Roles > [select beltpack] Use Local Settings PUB-00243 Rev A October 16, 2023 Copyright © 2023 HME Clear-Com Ltd. All rights reserved.
- Page 4 Find this control under the Mic and Headset Options in the Roles screen. You can select multiple beltpack roles in the configuration software so you do not have to change this option on each individual beltpack. PUB-00243 Rev A October 16, 2023 Copyright © 2023 HME Clear-Com Ltd. All rights reserved.
Need help?
Do you have a question about the Clear-Com FreeSpeak II 1.9 Beltpack with Bluetooth and is the answer not in the manual?
Questions and answers