Download Print this page

Advertisement

Quick Links

Document nr.: GS511-B_Manual
Revision nr.: F
Moun
Place the moun
te on the desired installa
where the holes should be drilled.
Drill two holes with a diameter of 5 millimetres.
Push the plas
to the holes.
Insert the screws into
the moun
te,
ten them
firmly into the plugs.
Place the smoke alarm
on the moun
bracket and secure it
by turning it clockwise.
Test the correct
opera
our
smoke alarm by
pressing the test
on. If no sound is
generated, the smoke
alarm is not
operly
and should not be
used!
Alarm silence facility
When the smoke alarm has detected smoke and turns into the alarm
mode, you can mute the alarm for approx 10±1 minutes by pressing
the cause of the alarm and make sure that the circumstances are safe.
Overview visual & acous
Opera
Visual (flash)
Normal
1 x per 40 seconds
Test
1 x per second (3 x) /
pause of 1,5 seconds
Alarm
1 x per second (3 x) /
pause of 1,5 seconds
Wireless alarm
None
Alarm silence
1 x per 8 seconds
Low ba ery warning
1 x per 40 seconds
Connected low ba ery warning
1 x per 3 hours
Low ba ery warning silence
None
Fault warning
None
-10-
Revision date: 25-06-2019
Low ba ery mode
a
When the ba ery is running low, the smoke alarm will indicate this with
a r
e beep and flash for approximately 30 days. WARNING: This
smoke alarm is equipped with a non-replaceable ba ery. When this
warning occurs, replace the device as soon as possible! The acous
ba ery warning signal can be muted for ten hours by pressing the test
Ceiling
on. The smoke alarm is s
when it's in this mode.
Fault warning mode
When the smok
fault warning mode. Try cleaning the smoke alarm (see paragraph
maintenance) or replace the smoke alarm!
Maintenance
Test this smoke alarm weekly for correct opera
facility. If the smok
beep. Due to the loudness of the alarm, make sure that you always
stand at arm's length distance from the unit when you are tes
the smoke alarm does not generate an acous
alarm must be replaced immediately!
Clean the smoke alarm at least once per month to remove dirt, dust or
debris. Use a v
and covers of the smoke alarm. Do not remove the top cover of the
smoke alarm to clean it inside.
Do not a empt to repair this smoke alarm. If the smoke alarm shows a
damage related t
Tr
Recycling and disposal
The WEEE symbol means that this product and ba eries
must be disposed separately from other household waste.
When they reach their end of life, take them to a designated
waste c
recycling. Protect the environment, human health and natural resources!
Acous
None
1 x per seconds (3 x) /
pause of 1,5 seconds
1 x per seconds (3 x) /
pause of 1,5 seconds
2 x per seconds
None
1 x per 40 seconds
1 x per 3 hours
None
1 x per 40 seconds
o detect smoke
operly, it will turn into the
est
orrectly, it will generate a loud
e
acuum all sides
, it must be replaced!
en caused by dust or steam.
t in your area to guarantee a safe disposal or
operly
Device is being tested
Device has detected smoke
Connected device detected smoke
Smoke alarm is muted
Ba ery is running low
Ba ery of connected device is running low
Low ba ery warning is muted
operly
-11-
SMOKE ALARM
GS511-B USER MANUAL
www.hear4you.com
Iden
a
Product type
: Smoke alarm
Item number
: GS511-B
Manufacturer
: Hearing Products International Limited
: Echo House, 26/27 Haigh Park,
Stockport, SK41QR, England
Website
: www.hear4you.com
19
Dop: (511-B)-CPR-001
EN 14604:2005/AC:2008
0905
Fire Safety
ESSENTIAL CHARACTERISTICS: PASSED
a
, Response delay (r
Performance under fire c
a
eliability - Tolerance to supply
voltage - Durability of opera
eliability and response delay, temperature
resistance, vibra
esistance, humidity resistance, corrosion resistance, electrical
stability
Download the Declara
erformance at www.hear4you.com

Advertisement

loading

Summary of Contents for Echo GS511-B

  • Page 1 Manufacturer : Hearing Products International Limited recycling. Protect the environment, human health and natural resources! : Echo House, 26/27 Haigh Park, Stockport, SK41QR, England Overview visual & acous Website : www.hear4you.com Opera Visual (flash)
  • Page 2 Thank you for purchasing our smoke alarm! Where to install a smoke alarm Where not to install a smoke alarm Please read these ins arefully and store them in a safe place Smoke alarms must be installed in such a way that they can be reached In an environment with a high risk of draught (e.g.
  • Page 3 Connect your smoke alarms 3x Press test button turn alarm into connect mode Red LED follwed by blue LED Choose one smoke alarm as the master smoke alarm master smoke alarm smoke alarm master smoke alarm master smoke alarm master smoke alarm 3x Press test button turn alarm into learn mode Red LED follwed by green LED indicating smoke alarm connected to each other smoke alarm...
  • Page 4 Reset connection Press and hold the test button then activate the alarm again by pushing the activation switch to the right. Remove alarm from mounting plate or push activation switch to the left to disconnect somke alarm. Hold the test button while the LED lights up red and release it when the LED turns off. When LED lights up again, press test button.