Advertisement
4.
OPERATION
4.1.
Choose correct locking wheel nut key for vehicle, and push into socket.
4.2.
Place the key over the wheel nut/bolt and rotate until the key slots into the wheel bolt/nut.
4.3.
Attach a 1/2" drive socket to the key socket and turn anti-clockwise to remove wheel bolt/nut.
4.4.
Replace key and socket in carry case after use.
4.5.
To replace bolt/nut reverse removal operation. Use torque wrench to tighten.
5.
MAINTENANCE
5.1.
Keep keys and adaptor clean and store in case provided.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SX210.V2
Issue 2 (H,2,F)
REGISTER YOUR
PURCHASE HERE
15/06/23
Advertisement
