Gigabyte R183-S94-AAH1 User Manual page 94

Parameter
PCIe Error Enabling
This item appears when PCIE Error is set to Enable.
(Note)
Description
Press [Enter] to configure advanced items.
PCIE Error
Š
– Enable/Disable PCIE error.
– Options available: Enable, Disable. Default setting is Disable.
Uncorrected Error
Š
– Enables and escalates Uncorrectable/Recoverable Errors to error pins.
– Options available: Enable, Disable. Default setting is Enable.
Fatal Error Enable
Š
– Enables and escalates Fatal Errors to error pins.
– Options available: Enable, Disable. Default setting is Enable.
Assert NMI on SERR
Š
– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs
an error when a system error (SERR) occurs.
– Options available: Enabled, Disabled. Default setting is Enabled.
Assert NMI on PERR
Š
– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs
an error when a processor bus parity error (PERR) occurs.
– Options available: Enabled, Disabled. Default setting is Enabled.
BIOS Setup
(Note)
(Note)
(Note)
(Note)
- 94 -