Getting Started; Firing The Laser - Cobalt Digital Inc Q4 Series Manual

GETTING STARTED:

Your Q4 rangefinder comes with a battery already installed.
Before using:
1. Open the battery door by releasing the latch and flipping the
door down.
2. Remove and discard the plastic insert sitting on top of the
battery.
3. The CR2 3V battery is already in place.
4. Flip battery door up and latch door back into place.
POWERING UP:
Once the battery is installed and the 4 steps are completed, press and release the POWER
button. The display will light up to show the unit is on and ready for ranging. The laser will
power down automatically after 10 seconds of non-use.

FIRING THE LASER:

To fire the laser, simply look through the ocular lens, press and release the POWER button
once to turn it on, align the reticle over the object you want distance to, and press and hold
to fire. Within the display are "Firing Indicators" (B.) letting you know the laser is firing. Let
go of the FIRE button once a distance has been displayed. At extended distances holding
the FIRE button might be required.
FOCUS:
Adjust the diopter focus until the image is sharp.