AEG GS60AI221 User Manual page 70

70
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Turn the programme knob until the
display shows two horizontal status
bars.
4. Press and hold Multitab and Delay at
the same time until the indicators
, and
FILLING THE SALT CONTAINER
flash.
Turn the water hardness dial to the posi-
tion 1 or 2.
5. Press Multitab.
• The indicators
• The indicator
• The display shows the setting of the
water softener. Example:
el 5.
6. Press Multitab again and again to
change the setting.
7. Deactivate the appliance to confirm.
,
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
and go off.
continues to flash.
= lev-