Table of Contents
Advertisement
Manual connection
If you see a red LED on the rear speaker, it means that the soundbar is not connected to the rear
speakers. If this is the case, connect them in the following order.
a Press the Power
b Press the PAIRING button on the back of the rear speaker. Check if the LED on the rear speaker is
blinking green.
c Press the Power
d When the connection is established, you will see the LED light on the rear speaker light up in green.
Note
• Keep the rear speakers at least 30 cm (11.8 inch) away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m (3.3 ft) between the soundbar or
the rear speakers and any peripheral devices that generate strong electromagnetic waves (ex. wireless
routers, microwave ovens, etc.).
button on the soundbar to turn it off.
button on the soundbar to turn it on.
11
Advertisement
Table of Contents
