Subscribe to Our Youtube Channel
Related Manuals for Zenith LX-230A
Summary of Contents for Zenith LX-230A
- Page 1 CI_LX-230A(ENG)-A075Z Installation and Operating Guide Machine Number | LX-230 (Main Unit : LX-230A, Speakers : LXS-230) | MICRO HI-FI SYSTEM...
-
Page 2: Precautions
Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSON- NEL. Explanation Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclo-... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANU- AL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. -
Page 4: Table Of Contents
Table of Contents INTRODUCTION Precautions ......2 IMPORTANT SAFETY INSTRUCTIONS ..3 Table of Contents . -
Page 5: Before Use
Before Use Safety Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To keep the surface clean Do not use volatile liquids, such as insecticide spray, near the unit. -
Page 6: Front Panel/Rear Panel
Front Panel/Rear Panel CD DOOR DISPLAY POWER ( STANDBY/ON) button • XDSS button • SURROUND button • RDS button : OPTIONAL • SET (CLOCK/ TIMER) button • CD PAUSE (CD ) button • COUNTER RESET button (COUNTER) : OPTIONAL • CD SYNC. button •... -
Page 7: Remote Control
Remote Control Display Window XDSS TIMER MUTE MUTE indicator CD PLAY/ PAUSE indicator XDSS (Extreme Dynamic Sound System) indicator TIMER indicator CD SYNCHRO RECORDING indicator SLEEP indicator PROGRAM indicator MEMORY indicator RDS indicator (OPTIONAL) XDSS button POWER button TUNER/ BAND button AUX button PRESET ( ) button... -
Page 8: Connections
Connections Speaker System Connection Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). Right speaker otes •... -
Page 9: Audio Adjustment
Audio Adjustment Setting the Voltage (OPTIONAL) If your set is equipped with a voltage selector at the back side, be sure to set it to your local power supplied before connecting the AC power cord. Setting the CLOCK Press CLOCK. (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) - The hours begin to flash. -
Page 10: Timer Function
Audio Adjustment Timer Function The unit can set the clock function in power on/off state. With the TIMER function you can have the radio recep- tion and recording, CD play, tape play or auxiliary source play and recording turned on and off at the time desired. -
Page 11: Presetting The Radio Stations
Presetting the radio stations You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. Press TUNER/BAND to select the frequency (AM or FM) you want. Every time you press this button, AM and FM changes alternately. -
Page 12: Tape Playback
Tape Playback You can use only normal tape. Basic Playback Press TAPE to select tape function. (“NO TAPE” appears in the display window.) Open cassette deck by pushing PUSH EJECT position. Insert a cassette with the tape side to the bottom and then close deck. -
Page 13: Cd Playback
CD Playback Basic Playback Press CD to select CD function. If no disc is loaded then “NO DISC” is displayed. Press CD OPEN/CLOSE ( ) and place the disc into the disc tray. To load an 8cm(3 inch) disc, put it onto the inner circle of the tray. -
Page 14: Troubleshooting
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. • The power cord is disconnected. • The audio cables are not No sound. connected securely. • The power of the external source equipment is switched off. -
Page 15: Specifications
Sound Pressure Level Rated Input Power Max. Input Power Net Dimensions (WxHxD) Net Weight (1EA) ❋ Designs and specifications are subject to change without notice. LX-230A AC 120V, 60Hz 4.46kg 40 - 18000 Hz 70 dB 70 dB 87.5 - 108.0 MHz 10.7 MHz... - Page 16 P/NO : 3828R-A075Z...
Need help?
Do you have a question about the LX-230A and is the answer not in the manual?
Questions and answers