How to use the Macintosh desktop adapter
How to use the Macintosh desktop adapter
How to use
a.
Set 1-6 to OFF status and 7-9 to ON status on the dip switches. Select the adjusting letter
which is correct to the Macintosh and the monitor. (Refer to page 19.)
b. Notes for Connecting to the Macintosh PowerBook
If you have problems after connecting the PowerBook to the projector, set dip switch number
9 to OFF status and restart the Macintosh PowerBook.
Adjusting letter code
ON
1 2 3 4 5 6 7 8 9
Adjusting number code
(Dip Switch)
18