Zenith MP360 Operating Manual page 20

USING MP3-Explorer
To download the MP3 files or data files from PC to MP3
Player, do the following:
Preparation
1
Insert the battery into the MP3 Player.
2
Put MP3 Player into the stop mode. (While the MP3
Player is operating you cannot download or upload)
3
Open Card door and load the Card 1 and/or 2.
To eject Card, open the Card door and push the Card 1 or 2
eject switch.
4
Connect the MP3 Player and your PC with the Data In/Out
cable.
20
Card 2
Card 1
Card Door
Card 2 eject switch
Card 1 eject switch