LG FV1412H2BA Owner's Manual page 38

global_main.book.book Page 38 Thursday, April 13, 2023 10:00 AM
OPERATION
38
NOTE
• Except for LED of the Delay End button, all LEDs
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
a Dispenser 1 button
b Dispenser 2 button
Buttons indicator
c
Liquid detergent indicator
d
e Link indicator (Using only liquid detergent both
compartments)
f Buttons indicator
Liquid fabric softener indicator
g
NOTE
• Whether the detergent or softener indicator may
blink and the chime may sound, even if there is
sufficient detergent or softener left to use for
approximately 2 to 4 washing programmes;
- If the liquid detergent indicator
buttons indicator ,
c
sounds, pour the detergent into the
compartment, up to the MAX line.
- If the liquid fabric softener indicator
buttons indicator blink and the chime
f
sounds, pour the fabric softener into the
compartment, up to the MAX line.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
and
d
blink and the chime
f
and
g
*1
Dispensed Amount
More (110%)
Normal (100%)
Less (90%)