Page 1
JONATHAN Y Model# VAN1003 Product Dimensions: 35”Wx18”Dx33”H WARNING : WEIGHT CAPACITY: 51 LBS SHELF LOAD CAPACITY: 29 LBS Warning : Do not stand on Vanity. Warning : Do not over torque bolts.
WARNING Inspect item carefully before a�emp�ng to install if there is any damage or obvious defect, do not install item may not be returned once it has been installed. CARE AND MAINTENANCE Always use felt pads under all ar�cles to prevent discolora�on or so�ening of the lacquer. Plas�c and rubber bases on items can discolor wood.
Page 3
Hardware x 16 B x 16 C x 19 D x 48 BC67 HS26A NUMBER OF PERSONS : 02 SET-UP TIME : 60 MINUTES TOOLS : Ver. 00 AUBERT 36 VANITY 3 of 12...
Page 4
Don't over �ghten ± 2 - 3 mm x 13 Don't over �ghten ± 2 - 3 mm Don't over �ghten ± 2 - 3 mm x 14 Ver. 00 AUBERT 36 VANITY 4 of 12...
Page 8
LT18A1 LT18A1 BC67 NOTE : Tighten all the screw BC67 Ver. 00 AUBERT 36 VANITY 8 of 12...
Page 9
Note : Hammer, scher and screw not include ATTACHMENT OF FURNITURE This furniture may represent a danger for your security if it’s attachment on the wall has been done in an incorrect way. This attachment must be done by a person with great expertise who will make sure adequacy between the device of xing and the wall.
Page 11
Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove any excess silicone compound with a wet rag Sold Separately Silicone not included Waterpass HS26A HS26A HS26A Ver. 00 AUBERT 36 VANITY 11 of 12...
Page 12
Note : TWIST FOR ADJUST x 16 Ver. 00 AUBERT 36 VANITY 12 of 12...
Need help?
Do you have a question about the VAN1003 and is the answer not in the manual?
Questions and answers