Zenith L30W26 Installation And Operating Manual page 48

Lcd av monitor
Hide thumbs Also See for L30W26:
Table of Contents

Advertisement

External Control Device Setup
03. Aspect Ratio (Command:c)
G To adjust the screen format.
You can also adjust the screen format using the ARC
button on remote control or in the Picture Adj. menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 0 : Wide screen (16:9)
1 : Normal screen (4:3)
2 : Full screen (Zoom)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][X]
Data 0 : Wide screen (16:9)
1 : Normal screen (4:3)
2 : Full screen (Zoom)
* Using the PC input, you select either Wide screen(16:9)
or Normal screen(4:3).
04. Screen Mute (Command:d)
G To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][X]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
05. Volume Mute (Command:e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][X]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
48
06. Volume Control (Command:f)
G To adjust volume.
You can also adjust volume with the VOL buttons on
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Transmit as Hexadecimal code.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][X]
Data Min : 0 ~ Max : 64
07. Contrast (Command:g)
G To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Transmit as Hexadecimal code.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][X]
Data Min : 0 ~ Max : 64
08. Brightness (Command:b)
G To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Transmit as Hexadecimal code.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][X]
Data Min : 0 ~ Max : 64

Advertisement

Table of Contents
loading

Table of Contents