Peavey FALCON CUSTOM FALCON STANDARD Operating Manual

FALCON CUSTOM
FALCON STANDARD
OPERATING GUIDE
WARNING: TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
BEFORE USING THIS APPLIANCE, READ BACK COVER FOR FURTHER WARNINGS.
FALCON ' CUSTOM FEATURES:
Poplar Body w/Carved Figured Maple Top
Bllamlnaled Figured Maple Neck
w/Rosewood Fingerboard
22 Nickel Silver Frets
12" Fingerboard Radius, 2SV Scale
Throe HRS (Hum Reducing System)
Frequency Tailored Pickups
One Master Volume/One Master Tone Control
Five-Position Pickup Selector Switch
PowerPend II Tremolo w'Graphite Sadtfes
Locking Machine Heads/Graphlon*' Topnut
All Gold Hardware
FALCON" STANDARD FEATURES:
Solid Poplar Body
Bilaminated Figured Maple Neck
w/Rosewood Fingerboard
22 Nickel Sliver Frets
12' Fingerboard Radius, 25V' Scale
3 HRS (Hum Reducing System) Frequency
Tailored Pickups
One Mosler Volume/One Master Tone Control
Five-Position Pickup Selector Switch
Power Rond II Tromolo w/Graphile Saddles
Locking Machine Heads
Graphlon" ToontJt
FALCON™ CUSTOM FALCON™ STANDARD
CONTROLS:
1. Volume Control: The volume control acts as a master
volume in that it controls the total signal level delivered
from the pickup to the output jack. Rotating the control
knob clockwise will increase volume; rotating counter¬
clockwise will reduce volume.
2. Tone Control: The tone control, like the volume control,
operates as a master control. Rotating clock¬
wise will result in more treble (high frequencies) and a
brighter tonality. Rotating counterclockwise will result
in less treble and a "bassier" type sound.
3. Pickup Selector Switch: This five-position switch allows
selection of any individual pickup, or two combinations
of multiple pickups. The available selection possibilities
are as follows:
First Position (Toward the neck) Selects output of neck
pickup only.
Second Position (One click back) Selects output of
neck and center pickups.
Third Position (Center) Selects output of center pickup
only.
Fourth Position (One click back of center) Selects
output of center and bridge pickups.
Fifth Position (Toward bridge) Selects output of bridge
pickup only.
NOTE:
CARE MUST BE TAKEN TO MAINTAIN: ADEQUATE
CLEARANCE BETWEEN THE PICKUPS AND STRINGS.
INADEQUATE CLEARANCE WILL RESULT IN LOSS OF
SUSTAIN AND POSSIBLE STRING BUZZING WHEN
PLAYING ON THE UPPER FRETS.