Zenith L15V36 Operating Manual page 26

PC Mode Adjustments (L15V36 Only)
4
Press the volume (
to make appropriate adjustments.
PC Setup
H-Position
V-Position
Clock
Phase
Auto configure
Reset
A
F G Adjust Back
H-Position/V-Position
: Adjusts picture left/right and up/down.
The adjustment ranges are -100~+100 / -30~+30.
Clock
: Minimizes any vertical bars or stripes appearing on the screen background.
The adjustment range is -30~+30.
Phase
: Allows you to remove any horizontal noise and clear up or sharpen the character images.
The range adjustment is -15~+15.
Auto-configure
: Automatically adjusts the screen position, clock and clock phase.
(The displayed image will disappear for a few seconds while Auto-configuration is in progress.)
Reset
: Returns to the default settings programmed at the factory; default settings
cannot be changed.
5 Press the exit
- Some signals from some graphics boards may not function properly. If the results are
unsatisfactory, adjust your monitor's position, clock and clock phase manually.
- If you turn on PIP, you cannot access PC setup. If you need to adjust PC setup, turn off
PIP first.
26
G ) and then use the volume (
0
G G
G G
G G
G G
G G
G G
button to save.
F , G ) buttons
206-3922