Table of Contents
Advertisement
SAP
(Second
SAP
(Second
On-screen display in stereo mode
On-screen display in bilingual mode : SAP
- Bilingual (second audio program) signal
This signal contains the secondary language signal in addition to the primary language.
There are primary and secondary languages and stereo modes in bilingual signals.
[MONO] : The primary language is heard from left and right speakers in mono sound.
[STEREO] : The primary language is heard from left and right speakers in stereo sound.
[SAP] : The secondary language is heard from both left and right speakers in mono sound.
1
Press the
mts
2
Use the
mts
button to change the audio mode.
Each press of
mts
Mono
3
Press the
enter
- Select Mono sound mode if the signal is not clear or in poor signal reception areas.
- STEREO and SAP modes are available only if included on the broadcast signal.
206-3825
Audio Program) Bilingual Signal Setup
Audio Program) Bilingual Signal Setup
: STEREO
button on the remote control.
changes the audio mode as shown below.
SAP
Stereo
A
(
) button to save.
35
Advertisement
Table of Contents
