Fault
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other
▶
appliances are working.
Inicio / Pausa +Carga
Press Inicio / Pausa +Carga
▶
Door is not closed.
Close the door.
▶
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 31
is activated.
Termin.
Check whether Termin.
▶
→ "Buttons", Page 22
Laundry is caught in the door.
Remove any trapped laundry.
▶
– – – is activated.
Continue the programme by selecting
▶
able programme for draining and pressing Inicio /
Pausa +Carga
→ "Resuming the programme when the programme
status is Rinse Hold", Page 30
The temperature is too high.
Wait until the temperature has dropped.
▶
Cancel the programme.
▶
→ "Cancelling the programme", Page 30
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 23
Power failure.
Open the door using the emergency release.
▶
→ "Emergency release", Page 45
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
▶
Drain pipe or water drain hose is caught or jammed.
has not been pressed.
.
is activated.
.
Troubleshooting en
or a suit-
39