INSTALLATION: Install the supplied tubes into the audio unit. Please be extremely IMPORTANT careful so the tube pins or sockets are not damaged. The Doshi This amplifier operates at high voltages. Stereo amplifier uses teflon tube sockets with machined contacts.
REAR PANEL CONTROLS POWER SWITCH: DISPLAY SWITCH: The button on the top left of the display window is the power On start up, the front panel will display the elapsed hour button. These buttons (or any controls) only work when the meter for 30 seconds and then go dark with a single blue dot rear power supply switch is turned on.
DESIGN PHILOSOPHY All Doshi Audio Evolution Series products are designed with sound quality and reliability as primary goals. The use of passive components that are rated for many times their actual dissipation which results in low thermal stress and heat modulation.
REAR PANEL CONTROLS: INPUT PANEL: One set of XLR and RCA connections is provided. The RCA (Single Ended input is the direct input and the XLR input is a differential input buffer. The RCA input is preferred for the shortest signal path. Ground Lift –in the event that a ground loop is created between the preamplifier, amplifier and other processors, the ground lift switch can be used to break the ground loop if necessary.
EL34/6CA7 type will work and provide subtle shifts in tonality 3000 hrs before a new tube set is needed. These can and power. The Doshi Stereo amplifier uses the output tubes be purchased through Doshi Audio. conservatively which provides for a long service life.
Pursuant to this Limited Warranty, BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR Doshi Audio LLC will, at its option, (i) repair the product using CONDITION ON THIS PRODUCT. new or refurbished parts or (ii) replace the product with a DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE new or refurbished product.
Page 8
EVOLUTION SERIES The V3 series was extremely well received by the press, dealers and customers. It has proven itself to be reliable, great sounding and distinctive in its “form follows function” looks. It was hard to improve upon in significant ways but we have achieved this goal in every area of performance and reliability.
Need help?
Do you have a question about the Evolution Series and is the answer not in the manual?
Questions and answers