Advertisement
2.
INTRODUCTION
All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is
being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle.
Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.
3. SPECIFICATION
Model no: ...........................................................ASH4000.V2
Capacity Each:................................................... 4000kg
Minimum Height:................................................. 1245mm
Maximum Height:................................................ 1845mm
4. OPERATION
4.1.
Before undertaking work, conduct a risk assessment with a responsible person and ensure it covers the weight to be supported and
a margin for error. Never work alone on a load supported on these stands. It is the employer's responsibility to ensure the operator
has read these instructions and is familiar with the products' use and limitations. Ensure that all operators can read English or have the
instructions explained to them in their native language. Also ensure the warnings on the product are observed.
4.2.
Vehicle must have wheels that stay in contact with the lift chocked before using the stands.
4.3.
Use only in conjunction with a permanently fixed vehicle lift - Never with any other jacking device. Elevate the lift to the appropriate
height and locate the supplementary supports, on the recommended support positions.
4.4.
Ensure the pin is inserted fully. Use stands as a pair to support either the front or rear of the vehicle only. BE CERTAIN that all
the stands are set to a height that will leave the load supported completely horizontal and not at an angle that could cause slipping
on the stand support heads. Ensure there are no objects or individuals in the area other than the operator and the supervisor. Take
extreme care in lifting or lowering the load. Engage the assistance of a colleague while you perform this task. LOWER ONTO ALL
STANDS BEING USED AT THE SAME TIME, ensuring load is lowered onto the centre of the crutch/saddle.
WARNING! When load is supported on stands never apply excessive force to the load so that it becomes unstable.
‰
4.5.
To remove stands, lift load slowly, ensuring that the load is balanced and will not slip from lifting points. Remove the stands.
5. MAINTENANCE
5.1.
Before and after each use, check that stands and stand welds are not cracked and that there are no missing or damaged parts. Any
suspect stands must be removed from service immediately.
5.2.
Periodically lubricate the main support column with general purpose oil.
5.3.
After use, wipe the stand and saddles clean.
5.4.
Store the stand in a dry childproof area.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
ASH4000.V2 Issue 1 01/11/22
REGISTER YOUR
PURCHASE HERE
Advertisement
