Overview: Computer Monitor Setup - Zenith Presentation H25C46DT Installation And Operating Manual, Warranty

Overview: Computer Monitor Setup

Read the following overview/instructions to set up your PCZTV (Presentation TV ) as a Computer Monitor
Using Your Presentation TV as a Computer Monitor (pages 7 - 14)
Connect your Computer to the TV using the cable provided
in the accessory packet supplied with the TV, follow the
hookup instructions on pages 8 and 9.
PC You can make a direct hookup to the TV's front or
rear computer connectors without using any adapters.
MAC Macintosh computers may require a Zenith PCZ40
adapter (typical DB-15 adapter which connects the
Macintosh 2-row connector to the TV's 3-row
connector) see your Zenith dealer or computer
reseller.
Video Mirror Connections (Optional)
The computer image can be sent to both the TV screen and
a computer monitor at the same time by using the video
mirror connection, follow the instructions on page 9.
PC Direct connection to the TV's connectors using the
cable provided in the accessory packet.
MAC Macintosh computers may require a Zenith PCZ40
adapter (typical DB-15 adapter which connects the
Macintosh 2-row connector to the TV's 3-row
connector) see your Zenith dealer or computer
reseller.
Adjust the Computer Display Output to TV Requirements
PC Computer display output settings must be set to
SVGA 800 x 600 @ 60 Hz.
MAC Macintosh display output settings must be set to
SVGA 800 x 600 @ 60 Hz.
Set Up the Presentation TV for Computer Requirements
PC If your Computer is hooked up to the TV's front
computer port which is 800 x 600 @60 Hz, choose
Note: The optional PCZ3000 Computer Scan Conversion Card Kit is available from your Zenith dealer
which enhances the image from your computer and allows you to link or daisy-chain a series of TV
sets; allows a computer's image to appear on a series of TVs connected to the PCZTV. See your Zenith
dealer for further details.
P A G E 6
FRONT VGA by pressing TV/VCR SOURCE repeatedly on
the remote control.
If your Computer is hooked up to the TV's rear
computer port, choose REAR SVGA by pressing
TV/VCR SOURCE repeatedly on the remote control.
MAC If your Macintosh is hooked up to the TV's front
computer port which is 800 x 600 @ 60Hz, choose
FRONT SVGA by pressing TV/VCR SOURCE repeatedly
on the remote control.
If your Macintosh is hooked up to the TV's rear
computer port, choose REAR SVGA by pressing
TV/VCR SOURCE repeatedly on the remote control.
Additional Computer Image Enhancements (Optional)
Additional computer output adjustments to optimize the
computer image quality appearing on the TV screen
PC See page 10 for Windows environment.
MAC See page 11 for Macintosh environment.
Troubleshooting
Problems? See troubleshooting on page 12 for PC comput-
er/TV problems or page 13 for Macintosh computer/TV prob-
lems.
Notes
• Avoid using hookup cables of excessive length (longer
than 25 feet). Long cables can adversely affect image qual-
ity and Computer/TV performance.
• Not all computer cables will work with the PCZTV. See
your Zenith dealer for special PCZTV extension cables.
206-3602