Summary of Contents for Abtus IP-AS11T/G
- Page 1 AV Over IP Model: IP-AS11T/G (Transmitter) Model: IP-AS11R/G (Receiver) ABtUS SIGAPORE PTE LTD www.abtussingapore.com rev.2021.01Jan.05 ABtUS SINGAPORE PTE LTD www.abtussingapore.com...
-
Page 2: Product Description
User Operation Guide PRODUCT DESCRIPTION The ABtUS AVOIP series (IP-AS11T/G & IP-AS11R/G) HDMI2.0 over IP Multicast with Video Wall can support AV transmission of up to 100m UHD 4K2K format. With cost effective Ethernet cable, users can readily extend UHD sources from DVD players,... -
Page 3: Panel Descriptions
PANEL DESCRIPTIONS IP-AS11T/G (Transmitter) No. Name Description Connect to upstream USB host HDMI loopout Connects to a HDMI display HDMI IN Connects to a HDMI source Analog audio line in Connect to an audio source +5V DC Connect to 5V DC power supply... - Page 4 User Operation Guide PANEL DESCRIPTIONS IP-AS11R/G (Receiver) No. Name Description USB(USB 2.0 downstream port) Connect to USB flash drive or other USB devices HDMI Out Connects to a HDMI display. HDMI IN Connects to a local HDMI source Analog audio line out Connect to an audio output/speaker +5V DC Connect to 5V DC power supply...
-
Page 5: System Operations
SYSTEM OPERATIONS Notes: Transmitter/Receiver channel selection DIP settings 1. For channel 1 to 63, please refer to the table below and move the DIP switch to the respective locations 2. For channel 64-1023, please set the DIP position to ID 0 on the hardware and proceed to change the channel ID in the GUI *Specifi... - Page 6 SYSTEM OPERATIONS IR Pass-through IR Blaster IR Receiver IR Socket IR BLASTER: connect the IR blaster to emit IR command signals received from the IR receiver of the far end AVOIP transmitter/receiver to control the corresponding devicees IR RECEIVER: connect the IR receiver to receive IR command signals from the IR remote Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders.
- Page 7 DIAGRAM ABtUS IP-AS11T/G Network Switch ABtUS IP-AS11R/G Wireless AVOIP Router Smart Controller *Specifi cations are subject to changes without notice.
-
Page 8: Specifications
5V 2A DC Power supply 6 Watts [max] 5 Watts [max] Power consumption Operation temperature 0~40°C [32~104°F] Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] Dimensions 430 x 358 x 291 mm Weight 786g 786g ABtUS SINGAPORE PTE LTD www.abtussingapore.com...