Samsung RB45 Series User Manual page 33

STEP 4 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage
to the refrigerator or physical injury.
• Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
The refrigerator can be levelled using the front legs that have a special screw (leveller) for
levelling purposes. Use a flat-head screwdriver for levelling.
STEP 5 Unpack and assemble the multi tray (applicable models only)
For shipping and safety purposes, the multi tray is packed and stored in the freezer
drawer. Unpack the multi tray and assemble it beneath the fridge shelf.
Untitled-6 33
To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the front left leg. Turn the
leveller clockwise to raise, or turn it
anticlockwise to lower.
To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller of the front right leg. Turn the
leveller clockwise to raise, or turn it
anticlockwise to lower.
• Insert the multi tray into the sliding rail
beneath the top fridge shelf.
English 33
2023-12-27 5:37:05