Aux 1 -2 -3 - Zenith C27V22 Operating Manual & Warranty

Aux-1, Aux-2, Aux-3
Control up to seven different devices with your remote
1
Refer to the chart on page 49/50 to find the type and brand
name of the device you're programming.
2 Press and hold PRG until the indicator light turns on, then
release PRG.
3
Press AUX and the 1 on the NUMBER keypad at the same
time (for AUX +1).
4
Using the NUMBER keypad, enter the three-number code for
the device you've selected.
5
Press ENTER to save the code.
6
With the device turned on, point the remote at it and press
POWER. It should turn off.
7
Repeat the steps for AUX+2, and AUX+3.
Programming your Zenith remote may allow you to use one remote to
work up to 7 different products or devices.
Some devices may not work with your Zenith remote control.
Mini glossary
AUX Auxiliary equipment. Can be any equipment which does not have a dedicated key on your remote like Cable or VCR.
Typically a second VCR, stereo system, audio tape deck, etc.
206-3594
Indicator Light
2
PRG
3
CABLE VCR
AUX
SURF FLASHBK
CHANNEL
VOLUME VOLUME
CHANNEL
1 2
4 5
7 8
0
ENTER
MENU
RECORD PAUSE TIMER
PLAY
REWIND
STOP
6
POWER
TV
MUTE
3
4
6
9
5
QUIT
TV/VCR
SOURCE
FFWD
P A G E 4 7