Advertisement
The Roadstart will only detect a reverse polarity connection when the main switch is on.
5.1.3.
24V battery connection protection: In the event of accidental connection to a 24V battery system, the Roadstart unit will
automatically enable its overload protection and switch power output off. The red LED, see fig.3, will illuminate on at the front panel,
along with the warning tone. Even though this protection will protect the Roadstart from catastrophic failure, extreme care should be
taken by the user to correctly identify the type of battery to be jump started and the operating voltage of the system.
5.1.4.
Over load and over temperature protection: When in use as a Roadstart, if load is too big or unit is under load for too long, the red
LED on front panel will flash, see fig.3, also the Roadstart will stop output. After a period of resting time it will automatically start again.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
RS1B.V1, RS102B.V1
Issue 1
REGISTER YOUR
PURCHASE HERE
19/02/24
Advertisement
