Table of Contents
Advertisement
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby and
Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function in
"ON" state, please go to OSD Menu, then
select "USB standby mode", and switch it
to "ON" state. Somehow if your monitor
reset to factory setting, ensure to select
"USB standby mode" to "ON" state in
OSD menu.
5
USB charging
This display has USB ports capable of
standard power output including some
with USB charging function (identifiable
with power icon
USB
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Some selected Philips displays may not
Power or Charge your device when it
enters to "Sleep/Standby" mode (White
power LED blinking). In that case, please
enter to OSD Menu and select "USB
Standby Mode", then, turn the function
to "ON" mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep/standby mode.
SmartImage
Game Mode
Ambiglow
HDMI Refresh Rate
USB-C Setting
OSD Setting
USB Standby Mode
PIP/ PBP
KVM
Smart Size
USB Setting
Local Dimming
Over Scan
Resolution
Refresh Rate
3440X1440
60Hz
). You can use these
Input
Audio
System
Setup
High Resolution
On
On
Off
Auto
Input Source
Adaptive Sync
SmartImage
HDMI 1
Off
SmartUniformity
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by the high-speed signal of USB3.2
devices, which may result in a decreased
efficiency of the radio transmission.
Should this happen, please try the
following methods to help reduce the
effects of interference.
•
Try to keep USB2.0 receivers away
from USB3.2 connection port.
•
Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.
Close
Select
OK
Back
7
Advertisement
Table of Contents
