Table of Contents
Advertisement
Preparation
After detecting the water hardness:
1. When the Programme Selection knob is in Off position, press and hold the Start/Pause/
Cancel key and turn the Programme Selection knob clockwise by one level within 5 seconds.
Once this time has elapsed, the product will enter the regeneration setting mode.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3.To adjust the new Water Hardness Level, move the Programme Selection knob to the
position that is suitable for your supply water. (see, Water Hardness Level Adjustment
Table)
**Programme Selection knob rotates in 5 steps regardless of the number of the
programmes contained on the machine.
4. To store, set the Programme Selection knob to "Off" position.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to "3" in the
control panel, also set the regeneration adjustment switch to 3.
Regeneration Adjustment Switch
Dishwasher / User's Manual
German Water
French* Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
Level 0
1
Position of
programme
Water Hardness Level Indicator
selection
knob*
1
Washing lamp on the panel will
illuminate.
1
Drying lamp on the panel will
2
illuminate.
3
End lamp on the panel will illuminate.
Washing, Drying and End lamps on
4
the panel will illuminate.
Washing, Drying and End lamps
5
on the panel will flash at 1-second
intervals.
Level 1
Level 2
1
2
Level 3
Level 4
Level 5
3
4
13 / 42 EN
5
Advertisement
Table of Contents
