Wolf E Series Installation Manual page 9

Installation
Installation
Place the oven in the opening and slide back.
Locate the mounting holes on the oven side trim, two on
each side. Drill 1/16" pilot holes. Use the provided mounting
screws to secure the oven to the cabinetry. Refer to the
illustration below.
To avoid interference, a 90° door stop may be required for
any appliance or cabinet door installed next to the oven.
MOUNTING
HOLES
Oven installation
CAUTION
Failure to install the mounting screws may cause the
oven to tip forward during use.
wolfappliance.com | 9