Table of Contents
Advertisement
Note
•
This Philips monitor is certified
with AMD FreeSync™ only. The
technology is used to match the
refresh rate of the monitor to
the graphic cards. Providing the
smoothest gaming experience by
reducing or eliminating judder,
tearing, and stuttering.
Enabling Adaptive-Sync from
the On-Screen Display menu
will automatically activate the
appropriate technology depending
on the graphics card installed in your
computer:
•
If using an AMD Radeon graphics
card, FreeSync will be enabled.
•
Go to www.philips.com/support
to download the latest version of
leaflet to get more information on
FreeSync certification.
3
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
3440 x 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 3440 x
1440 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Firmware
4
The over-the-air (OTA) firmware update
is through the SmartControl software
and is easily downloadable through the
Philips website. What does SmartControl
do? It is an additional software that
helps control the photo, audio, and the
other on-screen graphic settings of the
monitor.
In the "Setup" section, you can check
which firmware version you currently
have and if you need to upgrade or not.
In addition, it is important to note that
the firmware upgrades must be done
through the SmartControl software.
It is necessary to be connected to a
network when updating the firmware
on SmartControl over-the-air (OTA).
Physical Function
5
Tilt
Swivel
-20°
10
20°
-5°
+20°
Advertisement
Table of Contents
