Advertisement
Quick Links
Advertisement
Related Manuals for Sense S1871
Summary of Contents for Sense S1871
- Page 1 S1871 User Manual Sense Technology Co. Ltd. www.sense-hk.com July, 23th, 2008...
-
Page 2: Connector Description
Firmware Update Pin Supported; Dimension: 65mm×40mm×9mm 2. Connector Description The connectors of S1871 module are shown as Fig 1 and the Table 1 is their description. Fig 1 The connectors of S1871 module Table 1 Description of the connectors of S1871 module... -
Page 3: Pin Description
Connector Description A Mini Connector. Used as data communication and firmware update A 14-Pin Connector. Mounted on the Top side of the module. Used as data communication, low power control and firmware update control A 6-Pin Connector. Mounted on the Bottom Side of the Module. Used as GPIO A Connector to Antenna 3. -
Page 4: Electrical Characteristics
PIN 3 GPIO 2 PIN 4 GPIO 3 PIN 5 GPIO 4 PIN 6 GPIO 5 4. Electrical Characteristics Table 4 The Electrical Characteristics of S1871 module Parameter Typical Comments Supports ETSI, FCC and Frequency 860MHz 960MHz China RFID Regulation... - Page 5 Do not attempt to disassemble the product and battery by yourself. Non-expert handling of the devices may damage them. Our reader is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.