Table of Contents
Advertisement
Push VCR CH А
to start Channel
Auto Set and
Clock Auto Set.
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND
IF YOU USE A CABLE
VCR
| E
CH 18
BOX, TUNE IT TO YOUR
LOCAL PBS CH
THEN...
PLEASE PUSH CH UP KEY
These on-screen displays will appear in sequence.
* CH AUTO SET PROCEEDING
* CH AUTO SET COMPLETED
* AUTO CLOCK SET PROCEEDING
12/25/1996 WED 12:00PM
DST: ON
SETTING
: CHO2
AUTO CLOCK SET
IS
INCOMPLETE
AUTO CLOCK SET
COMPLETED
END
: PUSH CH UP KEY
PUSH MENU TO SET CLOCK
Confirm that displayed time is
correct and push CH UP to exit.
If the сарае time and D.S.T. аге
incorrect, p
In the rare event that you live close to
two different time zones, the VCR may
recognize the wrong PBS station as the
setting channel. In this case, please do
the following:
1 Make a note of the SETTING:CH number
shown on-screen and push CH UP to exit.
2 Delete the setting channel from the VCR
channel memory. (See the Add or Delete a
channel section on page 12.)
3 Push the MENU button to display the menu.
4 Use the Wheel to select "SET CLOCK" and
then to select "AUTO SET."
* if you use a cable box and have multiple
PBS stations, tune the cable box to a
different PBS station and try auto clock set
again using the menu.
If the screen above appears, auto
clock set is not available in your
area. Please set the clock manually
as described at right.
ease proceed as follows:
MENU
WHEEL
Manual Clock Set
1 Push MENU to display
the set clock screen.
BY ROTATING WHEEL
2 Rotate and push the
PEET
Wheel to select and
(то Eno Pusn menu xev
enter the month, date, - "DST:ON" automatically
year, time and D.S.T.
adjusts for daylight
i
j
i
saving time.
(Daylight Saving Time).
(See Roos 5)
To Make Corrections,
push the Wheel or CLEAR button repeatedly
to move back or forward to the desired item.
2| 2/1996 FRI
1:30PM
1
DST:
3 Push MENU M
TO CORRECT
PUSH WHEEL OR CLEAR KEY
Start
the clock
exit this mode.
ОЗН УЛЕБ. OH MEAT KE
power is turned off.
11
C)
©
e
=
5
(O
UL
=,
©
һы
=
(D
о.
Advertisement
Table of Contents
