LEGRAND 0 677 97A Quick Start Manual

Connected switch with neutral
0 677 97A/98A/99A - 0 777 08LA - 6 000 90 A- 6 001 90A
Requires you to buy and install the «... with Netatmo» connected starter pack
OR
Control Modul Gateway power outlet control and Home/away wireless
Pack contents :
Connected switch with neutral Site protection
(with dimmer option)
Before starting : wiring precautions
If you plan to install two-way light switches, read the following precautions :
To control a light with two or more switches, only use the following products :
AND/OR
x 1 x 1
or several or several
Wireless switches for all control points (not included in
this pack)
Do not use: two connected switches (with dimmer option) to control the same
lighting point.
Master control
Connected switch with neutral (with
dimmer option)
AND
AND/OR
x 1
or several
up to 5 push buttons (not
included in this pack)
3
Characteristics
In default operating mode (on/off ), this switch works with the following bulbs :
Do not use a smart bulb with the connected switch with neutral
(with dimmer option).
+ 45° C
+ 5° C
110-240 VAC
2 x 1,5 mm
2
50/60 Hz
240 VAC Maxi. 150 W
110 VAC Maxi. 75 W
(*) or 15 bulbs max. For comfortable lighting, we recommend using bulbs of the same type and make.
Product NOT COMPATIBLE with ferromagnetic transformer
Risk of product breaking
In dimmer option operating mode (which can be activated via the App),
this switch functions only with dimmable bulbs (identifiable by the logo
on packaging).
Tip if replacing a two-way switch:
old flush-mounted switch replaced by the wireless switch.
Neutral
Traveller 2
Use a connector to connect all 3 wires together (travellers 1 and 2 and lamp return wire).
Use an other connector for neutral wire.
Necessary safety precautions
Switch off the power at
the main circuit breaker
OFF
Wire the connected switch with neutral (with dimmer option)
Remove the old switch
Wire the connected switch
Max. 30 m
Option : possibility to manage this
switch (with dimmer option) by up
to 5 mechanical push buttons (not
equipped with locator/indicator
light).
Frequency bands: 2.4 - 2.4835 GHz
Power level: < 100 mW
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
The connected light switch (with dimmer option) works with standard
bulbs or dimmable bulbs including LEDs. Using dimmable LEDs is
mandatory if dimmer mode is activated.
LED
* 150 VA 150 VA 150 VA
( )
( * ) 75 VA 75 VA 75 VA
Wire which goes back to the light
Traveller 1
2
Make sure that the power
is off before continuing
with the installation.
Attention, the dimmer must
be installed on the lamp side
4