Advertisement
Quick Links
Solvent Degassing Unit
GASTORR
AG-42 / AG-44 series
Instruction Manual
Ver. 2.0
To The User
We ask that you read this manual
carefully and in its entirety before
installing and using the unit.
After reading please keep the manual
for reference. A product warranty is
attached at the back.
1
Advertisement
Summary of Contents for Flom GASTORR AG-42 Series
- Page 1 Solvent Degassing Unit GASTORR AG-42 / AG-44 series Instruction Manual Ver. 2.0 To The User We ask that you read this manual carefully and in its entirety before installing and using the unit. After reading please keep the manual for reference. A product warranty is attached at the back.
- Page 2 There is a product warranty on the last page of this manual. Please be careful not to damage or lose it. In case of loss, contact FLOM and inform us of the model and serial number of the unit (for custom specification units, please also supply the specifications).
- Page 3 Table of Contents 1. Safety Precautions ································ p.1 2. Standard Accessory List ························· p.2 3. Specifications ····································· p.3 4. Principles of Operation ·························· p.4 5. Part Names and Functions ······················· p.5 6. Installation ······································· p.6 7. Operation ·········································· p.9 8. Error Indication ··································· p.9 9.
- Page 4 1. Safety Precautions Please read this instruction manual carefully and follow the instructions while installing, running, maintaining and servicing the degassing unit. Make sure you understand the basic operation of the unit, safety information, and the safety precautions listed below. <...
- Page 5 The white port caps are not solvent-resistant; please immediately wipe off any organic solvents spilled on it. Please do not use off-market or knock-off connector items on the unit; FLOM will not be responsible for any damage resulting from their use, and using such products may void...
- Page 6 Please understand that some photographs and illustrations in this manual may not reflect current designs due to product changes and improvements. Feel free to consult FLOM if you require any special-order products. Teflon AF™ and ETFE are registered trademarks of the Chemours.
- Page 7 4. Principles of Operation ＜4－1＞ Overview of the Unit The principle operating subsystems of the unit are as shown below. ⑥ LED Indicator ⑦ ⑦ ＜4－2＞ Overview of Component Parts Vacuum Chamber ① A capillary vacuum tube degases solvent. The connection to the pump and solvent can be connected to either of the left or right joints.
- Page 8 5. Part Names and Functions 1. Power Indicator 2. LED Indicator (Error Indicator) 4. Power Cord 3. Fluid Ports Connector 6. Power Switch 5. Fuse Case 7. Ground Front panel Rear panel ＜5－1＞ Front Panel 1. Power Indicator LED LED lights when the degassing unit is turned on. Green light shows the status of operation ready.
- Page 9 When first opening the unit packaging, check to make sure that all standard accessories are included. （See Section 2, Standard Accessory List.） ※Note: If any accessories are missing or damaged, contact your vendor. FLOM corporation will not be held responsible for any problems resulting from the use of the third-party parts.
- Page 10 ＜6－3＞ Fluid Connections Caution The degassing unit should be placed between the solvent bottle and the pump. Since the unit uses suction only to move fluid, never attempt to hook the pump up so that it tries to ‘push’ the fluid through the degasser. 1.
- Page 12 7. Operation ＜7－1＞ How to operate Turn on the power switch on the rear panel, and the device automatically start operation. Begin operation after you have finished the system installation as described in Section 6. Installation. ＜7－2＞ LED Indication When the power is turned on, POWER LED lights in red. The vacuum pump is activated and the inside of the chamber is degassed.
- Page 13 9. Treatment after Operation When the degasser stops for more than 12 hours, remove the fluid from the vacuum chamber by connecting the suction needle of the accessory as shown below. When degassing is performed without diluting the organic solvent, the gas concentration in the chamber increases if it is kept in the vacuum chamber, which may cause a failure of the vacuum pump.
- Page 14 ● Do not run this unit on a electric power system outside the standard AC 100V-240V (50/60 Hz) range. Doing so could result in fire, electrical shock or damage. ● If a malfunction occurs, stop operation immediately. Contact FLOM, providing clear descriptions of the problem. Using the unit after malfunction could cause fire, electrical shock, or injury.
- Page 15 solution. When changing connections, clean the sealed area of the port with cleaning solution before reconnecting. ● Do not run liquids with particulate matter or high viscosity through the unit. These can cause malfunction due to clogging in the vacuum chamber. ＜10－2＞...
- Page 16 11．Maintenance and Service ＜11－1＞ Maintenance Caution Please observe the following CAUTIONS at all times. 1. When changing from one solvent to another, always determine what kind of solvent has been left in the vacuum chamber from the previous operation. Follow the steps shown below to switch over from one solvent to another.
- Page 17 If a malfunction or problem occurs, please use the flowchart on the next page to determine the type of problem to the best of your ability, then contact your vendor or FLOM directly. When sending in a unit for service, first drain all solvent fluid out of the vacuum chamber. Sending a unit for service with fluid still in the chamber could cause damage to other components not involved in the original problem.
- Page 18 12．Consumable Parts Part Name Part Descriptions #0005 Suction Needle #9771 1/8” Hex Flat Seal Fittings (10 pcs./a pack) #9704 φ3 M6 Flat Seal Ferrules (10 pcs./a pack) #7104 PFA tube, OD 3 mm × ID 2 mm × 10 m ※Note: When ordering, please specify model and part name.
- Page 19 FLOM. However, FLOM Corporation will assume no responsibility for defects or damage due to, or substantially...