Advertisement
6. VOLTAGE CONTROL KNOB: Control the output
voltage.
7. 6A SNAP-ON OUTPUT TERMINAL
8. CIGAR-LIGHTER OUTPUT JACK
9. SPEAKER
15
+
10
–
10. SCREW-ON OUTPUT TERMINAL
11. FUSE
SPECIFICATIONS
VOLTAGE SOURCE:
OUTPUT VOLTAGE:
OUTPUT CURRENT:
RIPPLE AND NOISE:
LINE REGULATION:
LOAD REGULATION:
HEADPHONE JACK TYPE:
METER TYPE:
INPUT FUSE:
DIMENSION (W×H×D):
WEIGHT:
Miyata Building, No.15-1,1-chome Sugamo, Toshimaku Tokyo,Japan 170-0002 PHONE 03-3947-1411 FAX.03-3944-2981
13
12 11
120VAC
10A
DIAMOND ANTENNA CORPORATION
Home Page http://www.diamond-ant.co.jp
E-mail
12. GROUNDING: Connect to ground for better RFI
Stability.
13. COOLING FAN AIR INLET
14. POWER CORD
15. HEADPHONE JACK
CONNECTION AND OPERATION
1. Make sure the AC power source fits the input of
voltage unit labeled and plug it in the AC outlet.
2. Turn ON the unit and adjust the output voltage to
match with the input voltage of the equipment. Then
turn OFF the unit.
3. Connect the equipment to the unit. Red (+) is
connected to the positive polarity input of the
equipment and Black (-) is connected to the negative
polarity input of the equipment.
4. First turn ON the unit and then turn the equipment
ON.
5. When and operation is finished, turn off the
14
equipment first and then turn OFF the unit.
220VAC
40A (continuous)
8mV
180mV (±10% Variation)
180mV (0-100% Load)
Ø 3.5mm
Digital Meter
210mm×110mm×300mm
3 Kgs (Approx.)
overseas@diamond-ant.co.jp
230VAC
5-15V
r.m.s.
6A
240VAC
2024/01
7673-4000-5050
REV.1
Advertisement
