1. Product Introduction 1.1 Description The ADL-6920 lock is the latest generation of smart locks of our company which is able to be unlocked by fingerprint, password app and card. There are the single unlocking mode and double unlocking mode. Besides, it has many functions like voice prompting and temporary password setting that are suitable and convenient for the home and residential houses to use.
2. Lock Operation Setting 1.1 Situation of Secret Key Allocation Secret Administrator User Permissio Type Remote Proximity Secret Password Fingerprint Control Card Number of Secret Administrator+User=3+97=100 Secret Password+Card+Fingerprint+Remote Control Administrator+User = 100 Allocation 1.2Function and Operation 1.2.1System Initialization System Initialization: Press the Back Panel Setting and KeepèHear Two “Beep”...
verification. d) Do not change the current time setting. e) Do not change the normally open state. 1.2.2Enter the Setting Menu Enter the Setting Menu: Press the Back Panel Setting,Hear a “Beep” Sound Releaseè <Input Administrator Secret Key># èPrompt Verification SucceedèEnter Setting Menu ...
reaches the total amount of corresponding permissions, the system will prompt “Inventory is full”. e) The remote control cannot be registered as an administrator. Registration Administrator Secret Key Touch to Activate KeyboardèPress“*#” in turnè<Input Administrator Information>#èAdministrator SettingèRegister AdministratorèAdministrator Secret Key1# èAdministrator Secret Key2# èAdministrator Secret Key3#..
Delete User Secret Key a) Delete User(Single Delete): Enter Setting Menuè User SettingèDelete User è <Input User Secret Key and Number># Notes:Number must be 3-digit(Such as 001 ). b) Delete All User Secret Key: Enter Setting Menu è User SettingèDelete All Userè...
1.2.7 Low Voltage Alarm a) After secret key verification, when battery is low voltage (voltage value ≤ 4.8V, error 0.1V), system will issue a low voltage alarm, prompting user to replace the battery in time. b) Unlock can reach 200 times under continuous low voltage battery condition, (low voltage unlocking count is cleared in the non-low voltage state), system will open hardware protection mode and...
1.2.8 Mute Function Mute Function: Enter Setting Menuè System SettingèVoice SettingèClose Voice This mode only works for when user enters a secret key, unlocks, or locks. Dual User Verification Mode Dual User Verification Mode: Enter Setting MenuèVerification Mode SettingèDual User Verification ...
3.APP Instructions 3.1 Add Mobile Users: ① Download and open the App “Alta World” on your phone, Connect your phone to hotspot; ②Click “My Device” on the “I” page on the right, and click “+” in the upper right corner;...
⑨ Temporary PW: Create password, name, valid time, showing “Syncing”. Input temporary password on the lock, unlock after successful verification 3.2 Do’s And Don’ts (A)The mobile phone connection to the door lock is required to be at the same time as the smart lock user adding; (B)The WIFI account used by the first mobile phone user will become the default account for the smart door lock, while other users can only add mobile user under such WIFI network;...
Need help?
Do you have a question about the SADL 7920 and is the answer not in the manual?
Questions and answers