IBM 3164 Setup Instructions page 14

14
Connect communication and optional device cables.
a
Set the power switch to 0 (Off) .
C
To connect a printer or any other
optional device, insert its cable into the
logic element
D
and tighten the screws.
l-L---1 _ }
12
b
DANGER
Do not perform this step during an
electrical storm. Communication
cables can conduct lethal charges
of lightning.
Insert the communication cable firmly
into the logic element
El,
and tighten
the screws.
J
Refer to IBM 3164 ASCII Color Display
Station Description, GA18-2317 for
personalizing your display station (for
example, changing select values or keyboard
functions).
Retain this manual for possible later use.