INTRODUCTION RUNNER REB-B can satisfy every specifical need to motorize curtains and shutters. The built-in bidirectional radio receiver allows programming and managing the motor by remote control. WARNINGS FOR THE INSTALLATION •...
RUNNER REB-B WARNING: IMPORTANT SAFETY INSTRUCTION It is important to follow this instruction for people safety. Keep this instruction manual. TECHNICAL DATA Operator REB-B 28 28/2 REB-B 45 20/10 2 Nm 20 Nm Nominal torque 28 rpm 10 rpm Nominal speed...
Page 4
RUNNER REB-B INSTALLATION Put the adapter crown (5) on the base crown of the limit switch (7), being sure that the two reference joints (12 and 13) match. Ÿ Put the driving pulley (2) on the output pinion (3). Ÿ...
Page 5
RUNNER REB-B START UP: 1 - Storage of the first transmitter proceed within 10 s, after Click-Clak Click-Clak pushing the button Prog 2” 2” Warning: next actions of the curtain / roller shutter must be carried out hold-to-run (operation par. 5).
Page 6
RUNNER REB-B 9e - Factory resetting 14” Click-Clak Click-Clak Click-Clak Click-Clak 10 - Store or cancel one transmitter using a transmitter previously stored Click-Clak Click-Clak Click-Clak GUIDE TO PROBLEMS SOLUTIONS • Giving a movement command or pushing the button to start a manoeuvre, the motor does not start.
Page 7
RUNNER REB-B 5 - Operation mode: Automantic or hold-to-run of the transmitter Hold to run: at every pressure of a button (ascent or descent), the motor moves for 1 s. Holding down the button for more than 2 s, the motor moves in automatic Click-Clak mode.
Page 8
GI.BI.DI. S.r.l. Via Abetone Brennero, 177/B 46025 Poggio Rusco (MN) - ITALY Tel. +39.0386.52.20.11 Fax +39.0386.52.20.31 E-mail: info@gibidi.com Numero Verde: 800.290156 w w w . g i b i d i . c o m...