Advertisement
Quick Links
RUNNER REB-B
REB-B45 20/10
REB-B28 28/2
Motoriduttore tubolare elettronico
ISTRUZIONI PER L'INSTALLAZIONE
Electronic tubular motor
INSTRUCTION FOR INSTALLATION
Motoréducteur tubulaire électronique
INSTRUCTIONS POUR L'INSTALLATION
Motoreductor tubular electrónico
INSTRUCCIONES PARA LA INSTALACIÓN
IT
UK
FR
ES
Advertisement
Summary of Contents for GBD RUNNER REB-B
- Page 1 RUNNER REB-B REB-B45 20/10 Motoriduttore tubolare elettronico REB-B28 28/2 ISTRUZIONI PER L’INSTALLAZIONE Electronic tubular motor INSTRUCTION FOR INSTALLATION Motoréducteur tubulaire électronique INSTRUCTIONS POUR L’INSTALLATION Motoreductor tubular electrónico INSTRUCCIONES PARA LA INSTALACIÓN...
-
Page 2: Warnings For The User
INTRODUCTION RUNNER REB-B can satisfy every specifical need to motorize curtains and shutters. The built-in bidirectional radio receiver allows programming and managing the motor by remote control. WARNINGS FOR THE INSTALLATION •... -
Page 3: Technical Data
RUNNER REB-B WARNING: IMPORTANT SAFETY INSTRUCTION It is important to follow this instruction for people safety. Keep this instruction manual. TECHNICAL DATA Operator REB-B 28 28/2 REB-B 45 20/10 2 Nm 20 Nm Nominal torque 28 rpm 10 rpm Nominal speed... - Page 4 RUNNER REB-B INSTALLATION Put the adapter crown (5) on the base crown of the limit switch (7), being sure that the two reference joints (12 and 13) match. Ÿ Put the driving pulley (2) on the output pinion (3). Ÿ...
- Page 5 RUNNER REB-B START UP: 1 - Storage of the first transmitter proceed within 10 s, after Click-Clak Click-Clak pushing the button Prog 2” 2” Warning: next actions of the curtain / roller shutter must be carried out hold-to-run (operation par. 5).
- Page 6 RUNNER REB-B 9e - Factory resetting 14” Click-Clak Click-Clak Click-Clak Click-Clak 10 - Store or cancel one transmitter using a transmitter previously stored Click-Clak Click-Clak Click-Clak GUIDE TO PROBLEMS SOLUTIONS • Giving a movement command or pushing the button to start a manoeuvre, the motor does not start.
- Page 7 RUNNER REB-B 5 - Operation mode: Automantic or hold-to-run of the transmitter Hold to run: at every pressure of a button (ascent or descent), the motor moves for 1 s. Holding down the button for more than 2 s, the motor moves in automatic Click-Clak mode.
- Page 8 GI.BI.DI. S.r.l. Via Abetone Brennero, 177/B 46025 Poggio Rusco (MN) - ITALY Tel. +39.0386.52.20.11 Fax +39.0386.52.20.31 E-mail: info@gibidi.com Numero Verde: 800.290156 w w w . g i b i d i . c o m...