Download Print this page

Yli Electronic YK-168 Manual

Rfid/digital keypad control station

Advertisement

Quick Links

INTRODUCTION
YK-168 is an RFID and digital keypad control station,designed for access control and home security
applications.The control station provides 3 operation mode: i) RFID Card operation,ii) Digital Code
operation, iii) RFID Card+Digital Code combinations operation.
YK-168 provides multi-User Codes or single User Code, and provides manual code entry or auto
code entry.
YK-168 can be connected with door opening buttons and door bell, it has the safety functions as the
keypad locks or alarms after 5-10 false entries and tamper alarm.
YK-168 has advanced features with the Microprocessorand EEPROM non-volatile memory for reliable
performance.
YK-168 is fully keypad programmable, all programming proceed on the keypad.
YK-168 is a device of simple operation, easy to use, reliable functions; it is an ideal device for
office, home and factory in access control and security system installations.
TECHNICAL DATA
Dimensions:
Operating Voltage:
Current Drain:
Relay Output Contacts: N.O. and N.C. Dry Contact, Max Rating of Contact Current 3A/24VDC
Capacity of Recording: 250 ID Cards, 250 Codes or 1 Common Code
Card Reading Distance: Max Distance 10cm
Type of ID card:
Operating Temperature: -20℃-60℃
Operating Humidity:
Weight:
AUDIBLE & VISIBLE INDICATIONS
Definition of
Audible and
Visible Indications
Standby mode
Successful key entry
Successful card / code entry
Successful operation
Unsuccessful card / code
entry
Unsuccessful operation
In locking status
(no response to card / code
entry)
In programming mode
www.yli.cn
RFID/Digital Keypad
Control Station
Model:YK-168
117Lx117Wx21H(mm)
12VDC+10%
Quiescent State=25mA, Active State=70Ma (2 Relays actuated,
all LED lighted)
EM Card, 125KHZ
10%-90%
0.14kg
Status
Indicator STATUS
Amber LED
1 Flash in 2 Sec interval
1 Flash then light for 10Sec
(Press # to return to standby
mode)
2 Flashes
2 Flashes
5 Flashes
5 Flashes
1 Flash in 10 Sec interval
Light
Output
Audible Indicator
Indicator
PASS
Green LED
Buzzer
1 Beeps
Light
2 Beeps
2 Beeps
5 Beeps
5 Beeps
1 Short beep in 10
secretary interval
1 Long beep finish
locking
Light
We create security
R
EMC
tested
Germany
Key Act
Lamp
KEY ACT
LED
Light for
10Sec
1

Advertisement

loading

Summary of Contents for Yli Electronic YK-168

  • Page 1 YK-168 provides multi-User Codes or single User Code, and provides manual code entry or auto code entry. YK-168 can be connected with door opening buttons and door bell, it has the safety functions as the keypad locks or alarms after 5-10 false entries and tamper alarm.
  • Page 2 During programming Light Continuous Flash Programming confirmation Light Light 2 Beeps (PRESS KEY #) Continuous beeps Alarm status Continuous flash Alarm statusContinuous flashContinuous beeps Notice to user: (1)Successful entry, it will keep 10 seconds, if no further key entry in 10 seconds, It will return to normal operation status(Standby mode).
  • Page 3 A. Single User Code (Common User Code) PRESS KEY 5 Enter the User Code (4-8 digits) Deleting the common User Code When enter new common User Code the old one will be deleted automatically B. Multi-User Codes PRESS KEY 5 Enter the User Number (3 digits) Enter the User Code (4-8 digits) # (Confir-...
  • Page 4 Note: The restoring operations only restore the default programming code 1234,the recorded Data or Settings will not be changed or deleted. NOTICE TO INSTALLER (1)Around the control station in 50cm distance, there must be no any apparatus with 100 KHZ frequency sources (In order that no interference is appeared).