Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for CESVA LP002
- Page 1 LP002 Passive limiter USER MANUAL M_LP002_v0001_20190220_EN...
- Page 3 , founded in 1969 in Barcelona, has always engaged in the manufacturing of sound equipment and instruments with in-house R&D&I and patents. We are members of national and international committees for the creation and review of regulations and standards. has a flexible and efficient distribution network in more than 40 countries all over the world.
-
Page 4: Table Of Contents
1. What is in this manual? 2. Material and documentation 3. General description of the device 3.1 LP002 2-channel passive limiter 3.2 Main Features of the LP002 3.3 Device parts 4. Installation of the limiter 4.1 Connecting the LP002 4.2 Setting the LP002 limiter 4.3 Sealing... -
Page 5: What Is In This Manual
Chapter 3 describes the main features of the device and its physical parts. Chapter 4 describes the different connections needed to install, adjust and seal the device. Chapter 5 describes the LP002’s technical specifications and the device’s optional accessories. And finally, Chapter 6 contains information about maintenance and precautions to bear in mind. -
Page 6: Material And Documentation
Material and documentation 2. Material and documentation The first step is to check the material and documentation supplied with the device: Material included: LP002 limiter Bag with 4 cable glands 2 screws to seal the limiter Documentation included: ... -
Page 7: General Description Of The Device
The LP002 is a 2-channel (L+R) limiter with independent settings for each channel that guarantees that the sound level reproduced by each loudspeaker does not exceed the established limit at any time. The LP002 has been designed with passive components that respect the dynamics of the music and offer clear, distortion-free and uncut music. - Page 8 SEALABLE: The LP002 is built of metal, making it very rugged and, together with the mechanical sealing, guaranteeing that the device is fully protected. The mechanical sealing system consists of two screws with a through-hole on the head, a special wire for sealing and the plastic seal which, once waxed, renders the device totally tamper-proof.
-
Page 9: Device Parts
3.3 Device parts The following figure describes the most important parts of the LP002: Left channel cable gland input Right channel cable gland input Left channel input connector Right channel input connector Left channel attenuation range selector Right channel attenuation range selector... - Page 10 Chapter 3 General description of the device...
-
Page 11: Installation Of The Limiter
Installation of the limiter 4. Installation of the limiter The LP002 must be installed by a qualified person or company accredited according to Order ITC/1644/2011 (Official Spanish State Gazette 143 of 16/06/2011). The non-compliance of it means that the warranty is no longer valid, will not be responsible for any device malfunction or any damage caused directly or indirectly to other devices connected to the LP002. -
Page 12: Setting The Lp002 Limiter
4.2 Setting the LP002 limiter You will need the following material to set the LP002 limiter: a sound level meter, pink noise and a measuring tape. You will also need to know the limit permitted by the regulation, normally measured 1 m away from each loudspeaker. -
Page 13: Technical Specifications
Technical specifications 5. Technical specifications 5.1 General Characteristics DIMENSIONS: 250x130x68 mm WEIGHT: 1.5 kg 5.2 Inputs FOR EACH CHANNEL (L and R): MAXIMUM INPUT POWER: 50 Wrms INPUT IMPEDANCE: 4 - 8 MAXIMUM INPUT VOLTAGE: 20 Vrms 5.3 Connectivity MAXIMUM CABLE SECTION PERMITTED: Flexible cable 2.5 mm... -
Page 14: Standards
5.5 Standards Marking. Compliant with the 2014/30/EU and 2014/35/EU directives , as a manufacturer of electrical or electronic devices, informs you that the product you have just purchased complies with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Similarly, the product bears the following symbol, which indicates that it is subject to selective waste collection: 5.6 Accessories MODEL... - Page 16 Maracaibo, 6 08030 Barcelona (Spain) Tel. (+34) 934 335 240 Fax (+34) 933 479 310 www.cesva.com info@cesva.com...