Table of Contents
Advertisement
Quick Links
THANK YOU FOR PURCHASING YOUR BOLTLESS WIRE SHELVING.
Please carefully read and follow these instructions to assemble your unit.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over,
we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly.
Check Parts
TOOLS REQUIRED:
• Rubber Mallet
• Gloves
(10 x) Long Beam
Step 1
NOTE:
Posts are directional.
The slot must
point down.
P3
P6
Step 4
P7
WARNING: Make sure all rivets are fully seated into the post slots. This product should be permanently anchored
to a wall or other suitable surface to avoid serious or fatal injury. Suitable anchor kits are available at Stratco or any
hardware store. Do not allow children to climb on this furniture - it may topple over and badly injure a child.
1
FEBRUARY 2024
5 SHELF BOLTLESS
WIRE SHELVING
P1
P2
(10 x) Short Beam
Step 2
P2
P2
Step 5
P3
P4
(8 x) Post
(5 x) Brace
(5 x) Steel Wire
P3
SS-10437
P5
P6
(8 x) Post Cap
(4 x) Coupler
Step 3
P4
P1
Step 6
P6
P5
P7
P6
Advertisement
Table of Contents
Summary of Contents for Stratco SS-10437
- Page 1 WARNING: Make sure all rivets are fully seated into the post slots. This product should be permanently anchored to a wall or other suitable surface to avoid serious or fatal injury. Suitable anchor kits are available at Stratco or any hardware store.
- Page 2 5 SHELF BOLTLESS WIRE SHELVING SS-10437 WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over, we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly. Step 7 How To Attach Anchor To Masonry Walls (Hardware Provided): Mark with a pencil through the screw hole along the wall where the hole needs to be drilled.
Need help?
Do you have a question about the SS-10437 and is the answer not in the manual?
Questions and answers