Page 1
21V LITHIUM SECATEURS SAFETY AND OPERATING MANUAL LMCG260EH PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE UNIT LB21TT PROUDLY A STEELFORT PRODUCT NZ OWNED...
Thank you for purchasing our LawnMaster 21V which cannot be built into this manual. Lithium 2AH Secateurs, the information contained within this manual will help you to have many WORKPLACE SAFETY years of safe and trouble free use of this Lawnmaster product.
• Before connecting the power supply or battery • Do not use power tools for operations that pack, picking up, or carrying the tool, ensure are not compatible with their purpose, please the switch is in the off position to prevent select the tools, accessories and tool heads accidental starting.
Page 5
• Ensure you wear safety goggles, non-slip • If the battery pack is overused or overheats, shoes, and gloves, and firmly grip the tools. it may leak. Clean or replace contaminated • Wear protective gloves, keep your hands away parts as needed. The affected parts and the from the switch and the tools powered off leaking battery should not be used.
FEATURES & TECHNICAL DATA Handle Torx Pan Head Screw Battery Pack Failure Indicator Trigger Extension Interface Moving Blade Locking Pad Battery Indicator Fixed Blade Blade Fixing Nut Power Switch MODEL Battery 21V 2Ah Lithium Run Time 3-4 Hours Charge Time 2.5 Hours Cutting Length Hard Branches: 26mm Soft Branches: 32mm...
OPERATION Then please remove the battery pack and store it with the tool properly. NOTE: When installing or removing the battery pack, BLADE ADJUSTMENT AND REPLACEMENT please turn off the power switch and keep away from the blade to avoid accidentally triggering the switch and causing safety problems.
BLADE INSTALLATION The frequency of grinding depends on the characteristics of the sheared wood (hardness Install the moving blade, swing gear, gasket, and diameter), pruning rate and grinding tool. bearing, blade pin shaft and locating pin on the Add lubricating oil at least once after using 2 machine in turn, and add lubricating oil on the battery packs.
INSTALLING THE BATTERY CHARGING METHOD Please correctly insert the battery pack into the The charger is suitable for charging lithium-ion housing when installing as below pics show. Be sure batteries of specified models under general to insert it to the bottom until you hear a “click”, environmental conditions.
MAINTENANCE Tools that are not used for a long time shall be care- fully checked before use. Please use the tool after the inspection passed and the “qualified” mark pasted. SIDE COVER CLEANING The maintenance of tools shall be carried out by the maintenance unit approved by the original production Please remove the side cover and clean up the sun- unit...