Beghelli MPLSEL Installation Instructions

General Safety Information

• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and
• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
other hazards, read all warnings and instructions included with and on the fixture carton and all fixture labels.
• Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician, D O
• This fixture is intended to be connected to a properly installed and grounded UL Listed j-box
NOT INSTALL DAMAGED PRODUCT!
WARNING: RISK OF ELECTRICAL SHOCK
• Tum off electrical power at fuse or circuit breaker box before wiring fixture to the power supply
• Tum off the power when performing any maintenance
• Verify that supply voltage is correct by comparing it with the luminaire label information, NEC and any applicable local code
• Make all electrical and grounded connections in accordance with the National Electrical Code
requirements
• All wiring connections should be capped with UL approved wire connectors
CAUTION: RISK OF INJURY
• Unit will fall if not installed properly-- Follow installation instructions
• Wear gloves and safety glasses at all times when removing luminaire from carton, installing, servicing or performing
• Avoid direct eye exposure to the light source while it is on
Maintenance
• Account for small parts and destroy packing material, as these may be hazardous to children
CAUTION: RISK OF FIRE
• Keep combustible and other materials that can burn away from luminaire and LEDs/ lens
• MIN 75°C SUPPLY CONDUCTORS
CCT and Lumen Adjustment:
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
Page 1 of 4
INSTALLATION INSTRUCTIONS
MPLSEL
12/5/23