Ideal Security 636V2 Instruction Manual

636V2 EMERGENCY LIGHT FOR HOME POWER FAILURE
CONTENTS
1 x 636V2 Light fixture
3 x Pre-installed 18650 button top rechargeable Li-ion batteries
USB type C charge cable 10 ft.
USB wall charger
Accessories for wall mounting are not included.
WARNING
Not for outdoor installations
Do not let power cord (adapter) touch hot surfaces
Do not use this unit for other than its intended use
Do not mount near gas or electric heaters
Do not wire directly to AC circuit
QUICK START
For a quick start, plug in the unit and locate the top switch on the side of the unit and
set it to Emergency.
OPERATION
Adjust switches on the side for your desired application. Keep unit plugged in when
not in use to ensure that it is always charged.
Emergency Mode
Light will turn on when there's a power failure.
Set top switch to Emergency.
Set bottom switch to Low Power or Full Power for desired light intensity when
there's a power failure.
Night Light Mode
Night Light will be ON in the dark and OFF in bright conditions.
Set top switch to Night Light.
Night light function provides a soft accent light. Low Power or Full Power modes
do not affect the intensity of illumination of the light in Night Light mode.
Emergency Mode with Night Light
Night light will be ON in the dark and OFF in bright conditions. Light will be ON when
there's a power failure.
Set top switch to Auto.
Set bottom switch to Low Power or Full Power for desired light intensity when
there's a power failure.
www.idealinc.com
Night light function provides a soft accent light, Low Power or Full Power modes
do not affect the intensity of illumination of the light in Night Light mode.
Portable Flashlight Mode
Unplug unit.
Set top switch to Emergency.
Set bottom switch to Low Power or Full Power for desired light intensity.
RUNTIME
In Low Power Mode, a fully charged battery will provide up to 48 hours of light
when there's a power failure.
In Full Power Mode, a fully charged battery will provide up to 21.5 hours of light
when there's a power failure.
CHARGING
1. Connect the charge cable to the light and to the wall charger, then plug the charger
into a standard AC outlet to charge the batteries.
2. The unit must be plugged in for 24 hours for a full charge.
3. If the unit is used as a portable light or flashlight, it must be plugged back in
after use.
LED
The LED located on the front of the unit has two functions:
When the unit is plugged-in and there's power, it acts as a charge indicator.
The LED will stay lit in red while the battery is charging and will turn green when
the unit is fully charged.
When there's a power failure, it acts as a battery low indicator while in use in
Emergency modes. The LED remains off as long as the battery level is greater
than 20%. When battery level drops below 20%, the LED will start to flash and
will continue to flash until the battery level is 0% and the unit shuts off. The
flashing LED reminds user to plug it in so the batteries will be recharged (when
the power comes back on).
TEST BUTTON
The test button simulates the functioning of the unit in a power failure and will only
work when the unit is plugged in.
BATTERIES
This unit includes 3 x 18650 button top rechargeable Li-ion batteries.
Replace with button top rechargeable 18650 Li-ion batteries.
• When changing batteries, all three batteries should have the same voltage of
3.7 V, and the same capacities.
636V2
DISPOSAL
Button top rechargeable Li-ion batteries must be disposed of properly. These
rechargeable batteries have a long life when cared for as instructed. When the batteries
no longer maintain their charge, they should be removed and sent to recycling as per
your local regulations.
MOUNTING
This unit can be mounted on a wall or placed on a shelf.
To mount on a wall, use the keyhole slots on back plate. Using the template below,
place two screws (we suggest using M4 or #6, Pan Head or Flat Head screws or #8 Flat
Head screws), use anchors if mounting in drywall, in the wall. Do not tighten the screws
completely. Place the light in desired position by lining up the screws with the hanging
holes on the back of the unit.
SWIVEL HEADS
Both light heads can be rotated clockwise or counterclockwise and tilted up and down.
The rotation of the heads is limited. Do not force rotation to avoid damaging the unit.
Fig. 1
Fig. 2
WARRANTY
This light is warranted to be free of defective materials and workmanship for a period
of one year from date of purchase. In case of malfunction, this unit will be repaired
or replaced at no charge by Ideal Security Inc. Warranty begins on date of consumer
purchase. Repair or replacement as described above shall be the sole remedy to the
consumer and there shall be no liability on the part of Ideal Security Inc. for any
special, indirect, incidental or consequential damages, including but not limited to any
loss of business or profits whether or not foreseeable.
Scan for additional set-up resources
www.idealinc.com
100 mm
info@idealinc.com
help.idealinc.com