Advertisement
Quick Links
FRES200RGBL Instruction Manual
200 Watt Full Colour LED Fresnel
In Compliance with the following directives: RoHS Directive
If this product is no longer functional or reaches the end of its
Version 1.0
FRES200RGBL Manual.indd 1
FRES200RGBL Manual.indd 1
CAUTION - ATTENTION - VORSICHT
RISK OF ELECTRIC SHOCK- DO NOT OPEN
RISQUE D'ELECTROCUTION- NE PAS OUVRIR
STROMSCHLAGGEFAHR- NICHT OFFNEN
(2002/95/EU) and WEEE Directive (2002/96/EU)
usable life, please take it to an approved recycling plant.
www.terralec.co.uk
21/09/2023 12:36:47
21/09/2023 12:36:47
Advertisement
Summary of Contents for Perform FX FRES200RGBL
- Page 1 FRES200RGBL Instruction Manual 200 Watt Full Colour LED Fresnel CAUTION - ATTENTION - VORSICHT RISK OF ELECTRIC SHOCK- DO NOT OPEN RISQUE D’ELECTROCUTION- NE PAS OUVRIR STROMSCHLAGGEFAHR- NICHT OFFNEN In Compliance with the following directives: RoHS Directive (2002/95/EU) and WEEE Directive (2002/96/EU) If this product is no longer functional or reaches the end of its usable life, please take it to an approved recycling plant.
- Page 2 For your safety and to ensure you make full use of the FRES200RGBL features, please make sure you read this manual in full. Before Use •...
- Page 3 • The operator must make sure the light fitting has been installed correctly to all the necessary guidelines before each use. • The installation should be inspected every 6 months. FRES200RGBL Manual.indd 3 FRES200RGBL Manual.indd 3 21/09/2023 12:36:47 21/09/2023 12:36:47...
-
Page 4: Product Description
Equipped with a low-noise, temperature-controlled cooling fan to ensure the LED stays within its optimal operating temperature range. Control the Perform FX FRES200RGBL through various modes, including standalone mode and DMX control. It offers five different channel modes for DMX control, providing maximum flexibility in lighting setups. - Page 5 Fasten the light into the desired position. 10 Display & Menu Buttons Used to adjust the units settings. 11 Locking Clip Used to keep the barn door and colour frame in place. Push to release. FRES200RGBL Manual.indd 5 FRES200RGBL Manual.indd 5 21/09/2023 12:36:47 21/09/2023 12:36:47...
- Page 6 Used to go to the next menu or decrease parameter value. 15 Enter Button Used to select a menu option or confirm a setting. 16 Display Shows the various menus and selected functions. FRES200RGBL Manual.indd 6 FRES200RGBL Manual.indd 6 21/09/2023 12:36:48 21/09/2023 12:36:48...
- Page 7 2.0KHz 2.0KHz PWM 8.0KHz 8.0KHz PWM 16.0KHz 16.0KHz PWM Auto Silence FADE Fade off Fade 1 Fade 2 Fade 3 Fade 4 TEMP RESET YES/NO Reset Version VERSION F104.9 Version FRES200RGBL Manual.indd 7 FRES200RGBL Manual.indd 7 21/09/2023 12:36:48 21/09/2023 12:36:48...
- Page 8 091-120 4000K 121-150 5600K 151-255 6000K Strobe 000-005 No function 006-255 Strobe slow to fast 000-030 Fade off 031-060 Fade 1 061-090 Fade 2 091-120 Fade 3 121-255 Fade 4 FRES200RGBL Manual.indd 8 FRES200RGBL Manual.indd 8 21/09/2023 12:36:48 21/09/2023 12:36:48...
-
Page 9: Dmx Basics
A DMX terminator is simply a male XLR plug with 120 Ohms, ¼ watt resistor, soldered across pins 2 and 3. You can also buy these pre-made. FRES200RGBL Manual.indd 9 FRES200RGBL Manual.indd 9 21/09/2023 12:36:48... - Page 10 When setting your DMX address, you must ensure fixtures don’t overlap from one to the next. You can set two fixtures to the same address, and as long as they are the same fixture (i.e. same channel layout) then they will do the same as each other. FRES200RGBL Manual.indd 10 FRES200RGBL Manual.indd 10 21/09/2023 12:36:48...
- Page 11 FRES200RGBL Manual.indd 11 FRES200RGBL Manual.indd 11 21/09/2023 12:36:48 21/09/2023 12:36:48...
- Page 12 Thank you for taking the time to read this information. For further information, please contact sales@terralec.com or visit www.terralec.co.uk FRES200RGBL Manual.indd 12 FRES200RGBL Manual.indd 12 21/09/2023 12:36:48 21/09/2023 12:36:48...