Advertisement
Quick Links
Advertisement
Related Manuals for Jiecang Venta T
Summary of Contents for Jiecang Venta T
- Page 1 Venta T...
- Page 3 Part Part Side Bracket ST5*16 Wooden Screw Lifting Column Handset Center Rail Power Adapter Fixing Frame Left Power Adapter Frame Right Control Box Foot Screw Card Foot Glide Power Cord M6*14 Screw Connecting Cable M6*10 Screw Cable Clip ST5*20 Wooden Screw...
- Page 4 STEP 1: Install the frame left (part 4), frame right (part 5) and lifting column (part 2) with four (4) M6*10 screws (part 9). Do the same for the other column(Part 2) and the frame left (part 4), frame right (part 5) with four (4) M6*10 screws (part 9). STEP 2: Install the center rail (part 3) with eight (8) M6*10 screws (part 9).
- Page 5 STEP 4: Slide the side bracket (part 1) into the frame end. Insert the two (2) M6*14 screws (part 8) through the two (2) holes in the bottom of the frame end going into the inserted side bracket (part 1) . Using the allen wrench rotate each screw just a few turns.
-
Page 6: Troubleshooting
TROUBLE SHOOTING SPECIFICATIONS Height Range 625-1275mm (without desktop) Base Width 1080mm min.-1800mm max. Speed 32mm/s Load Capacity 1000N Duty Cycle 10% Max. 2 mins on, 18 mins off... - Page 7 PROGRAMMING (some models) SETTING THE LED RETRACTED HEIGHT (some models) SETTING THE UPPER ＆ LOWERLIMITS(some models)
- Page 8 HANDSET LOCK (some models) CHANGING INCHES TO CENTIMETERS (some models) CHANGING ANTI-COLLISION SENSITIVITY (some models)