Advertisement
Table of Contents
Contents
Tatybo XW3 - Headset Manual
Product introduction
- Inserted headband.
- All-inclusive protein leather earmuff.
- High-pass magnetic core.
- Omnidirectional microphone.
- RGB Lighting
- Volume control.
- Microphone On/Off.
- Four types of LED light changing.
- 3.5mm 2 in 1 Jack for microphone and audio.
- USB interface for power supply of LED lights.
Range of application
- Suit for PS4, XBOX ONE, tablet, phone, laptop, pc and other 3.5mm interface device.
- Support the 32-bit and 64-bit Win7 / Win8 / Win8.1 / Win 10 / XP.
- Not suit for XBOX 360, Ps3.
Operating instructions
When first use, please do as below
- Make sure the headset microphone switch is turned on.
- Make sure the device you used microphone switch is turned on.
- Find the voice setting.
- Enter into the"voice"for settings.
NOTE
Don't forget to check whether the headset mute button is closed or opened.
Frequently asked questions
When playing music, there is accompaniment but no singing?
The headset jack plug is 3.5 mm, which is the most popular international standard connection. If the headset is connected to a non-international standard interface, there will be background sound only, then a adapter cable is needed.
When the headphones work well but the voice chatting can't work?
- Please make sure the microphone switch is turned on.
- Please make sure the device is single interface device if you don't use splitter.
- The headset plug is quadrupolar, while your device may be of tripolar.
- For those device like computer which have 2 interface. You need a 1 into 2 spliiter to enjoy music and chatting at the same time.
There is electric current noise when using?
- Please check if the plug is well inserted into the interface device
- Please take away electronics of strong magnetic (such as the mobile phone, fan...)
- Please check if the microphone boost of the computer microphone is turned on. If
Product parameters
- Speaker size: Q50mm
- Impedance: 16 Q±IOO
- Sensitivity: 103±3dB
- Frequency range: 20Hz-20KHz
- Microphone: 6.0x2.7mm
- Microphone sensitivity: -42 ±3dB
- Microphone impedance: 2.2K Q
- Directionality: omni-directional length: 1.9 M±O.2
- LED working voltage: DC5V±5%
- Working current: S200mA
- Headset jack: USB+3.5MM+4Pin
Compatibility Information
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the XW3 that isn't answered in the manual? Leave your question here.