iLuv Aud Click - Portable Wi-Fi & Bluetooth Speaker Quick Start Manual

Also See for Aud Click:

Quick start manual (2 pages)

Table of Contents

Contents

1 CONTROLS
2 SETTING UP
3 BLUETOOTH PAIRING MANUALLY
4 RESET THE UNIT
5 WHAT'S INCLUDED
6 POWERING UP
7 WIFI OPERATION
8 BATTERY CHARGING
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

iLuv Aud Click - Portable Wi-Fi & Bluetooth Speaker Quick Start Manual

CONTROLS

THE AUD CLICK IS DESIGNED FOR HOME USE WI-FI CONNECTIVITY AND WILL NOT FUNCTION PROPERLY WITHIN AN OFFICE ENVIRONMENT WHERE WI-FI PROTECTIVE FIREWALLS ARE OPERATING.
CONTROLS
LED indicator
This indicator is for both "Mode" and "Battery Low" indication.
Top button

Wi-Fi Mode	Single click: Active Alexa service Press and hold: Play / Pause music / Stop Alarm / Timer alarm sound
Bluetooth Mode	Single click: Play / Pause music
Double click	Switch between Wi-Fi / Bluetooth

Volume control
Turn clockwise to raise volume. Turn counter clockwise to lower volume.

SETTING UP

Download the Aud Click APP to your smartphone (available in the apple or android app stores)
Follow the procedure on the app to set up Aud Click and sign in amazon account
Download the Alexa app from the app store and set up your account info such as location, news, music, and traffic.
* You must create an Amazon account to use all Alexa products
Come back to Aud Click app by switching to your previously opened apps and selecting the Aud Click window.
Click 'Next' button on the Aud Click app screen

After set up, Aud Click can run by itself without APP.

BLUETOOTH PAIRING MANUALLY

*Blue LED: Bluetooth is connected
*Flashing blue LED: Bluetooth is not connected

Power on the unit, and double click the top ring. LED indicator will change to blue, indicating that the Aud Click is in Bluetooth mode.
Press the WPS button, located at the bottom of the unit once. Aud Click will go into Bluetooth pairing mode and LED indicator will ash blue.
On your smartphone or tablet turn on Bluetooth and then select "iLuv AudClick" on smartphone set up page. Once Bluetooth is connected, Blue LED will stop ashing and stay on.
Select music from music player on your phone rather than Aud Click app
Press the top ring to play/pause music. Turn the silver ring clockwise to raise the volume, and counter-clockwise to lower the volume.
Double click the top ring to switch back to WiFi mode.

RESET THE UNIT

RESET MANUALLY
1. If the unit behaves abnormally, just use a paper clip or similar shaped tool to press the reset button which is located at the bottom of the unit.
2. After reset is done, you need to set it up from the beginning again.
RESET THROUGH APP
1. Click blue right arrow on the top of the app and open 'DEVICE LIST'
2. Click setting icon
3. Select FACTORY RESET menu

WHAT'S INCLUDED

POWERING UP

POWERING UP
To turn on, press and hold WPS button located on the bottom of the unit for 2 seconds. Once on, wait for a moment while the unit starts up. The default mode is WiFi. Once WiFi set up is successful, LED will stop ashing and stay on in white color.

WIFI OPERATION

Power on the unit. Unit should be under WiFi mode and white LED will stay on.
After clicking top ring, you can use voice command of Alexa

*For more examples of what you can ask Alexa, visit the Alexa App.

Below is some example:

Play Music - Click and Say "Play music on iTunes Radio"
Weather - Click and Say "What's the weather in [your location]?"
Spelling - Click and Say "How do you spell Apple?"

BATTERY CHARGING

If battery is low, the LED indicator will ash red.
Using the included USB charging cable, connect one side to your PC's or smartphone charger's USB port(DC 5V, 1A output) and the other side to the Aud Click.
While charging, LED indicator will remain red until fully charged. Once fully charged, LED will turn off.