Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Electron ARGON 18 2023
-
Page 2: Table Of Contents
Argon 18 dealer. High-end the specified torque setting components, particularly carbon parts, to prevent damage. require extra care during assembly. My Electron Date of Purchase: Retailer: Size: Serial Number:... -
Page 3: Tools Needed & Spare Parts Kit
Housing cutter Top Bearing: MR122 - 1 1/8”, 36° x 45° Chainring The Electron can run up to a 65T chainring with a 42.5mm chainline. Clearance based on Shimano Dura-Ace FC-7710 and BB-7710 track crankset. Seat Post Collar Ø 31.8mm... -
Page 4: Frameset Inspection
Frameset Inspection Before assembling your new Electron, please verify that you have all the Some of the following parts are already assembled on the frame. When assembling the bike, you will need to adjust these parts according to their following: torque specifications and fastener conditions when necessary. -
Page 5: Frameset Skus & Descriptions
Name A18 SKU# Electron Frame Electron Fork FK.ELEC.351A Electron 2022 Dropout Plate Assembly (2 Sides) 100284 Electron 2022 Dropout Tension Screw Assembly (2 Sides) 100285 Seatpost Collar 80411 Headset No.37E-D 100381 Optional parts that can be ordered separately 15mm 3D Headset Spacer For No 37 80391 *Except for the frame itself, which is not sold separately as a spare part, all parts can be ordered by referring to their respective SKU number.*... -
Page 6: Seatpost Installation
SeatPost installation 9.5Nm 0.5-1Nm M5 x 22mm 40Nm 12Nm 9.5Nm 35Nm Apply grease on the thread of the M5 x 22mm socket head screw. 0.5-1N Assemble the seat post collar (80411) as shown. M5 x 22mm Adjust the seatpost at the desired height. Tighten the M5 x 22mm socket head screw on the seatpost clamp to 4Nm. -
Page 7: Rear Dropout Assembly
rear dropout Assembly 100284 Assembling the rear dropout plate: Assemble the rear drop-out plate (100284) on the frame, the threaded plate goes on the inside. Apply a drop of blue Threadlocker (n. 242) on the M3x8mm screw threads and tighten to 2Nm. Repeat step for other side dropout. -
Page 8: D Headset Installation
3d headset installation Assembling the 3D headset ( 0mm ) Headset cup Apply grease to the inside of the headtube. Slowly press the cups into the frame using a headset press + adaptor until it sits flush with the frame. 15 mm available separately 25mm Column 80391 - 15mm*... - Page 9 HT-2 Stem installation HT-2 IMPORTANT: Faillure to follow these practices will automatically void any warranty claim against the manufacturer. 10Nm 10Nm 2-3 mm Important: Installing the stem: • No more than 30mm of spacers can be placed between the stem Cut the steerer so a 5mm spacer can be used on top of the stem.
-
Page 10: Fork Installation
Fork installation Dust cover for 3D Dust cover for 0mm Micro spacer Compression ring for 0mm Micro Compression spacer ring for 3D MR122 MR122 MR122 MR122 2x MR122 Apply grease onto all surfaces where the bearing sits (frame & fork) Insert the bottom bearing (MR122) on the fork steerer. -
Page 11: Brake Installation
Brake installation Brake Housing Concave washer M6 washer M6 nut Recessed brake Assembling the rear brake Assembling the front brake A rear brake can be mounted, however, there's no cable guide on the frame. Also, make sure the brake pivot screw is long enough to fix the brake on the Install the front brake with frame.
Need help?
Do you have a question about the ARGON 18 2023 and is the answer not in the manual?
Questions and answers