Yamaha MOTIF RACK Installation Manual page 6

5 Check the radio button to the left of "Search for the best driver for your
device. (Recommended)." Click [Next]. The window below enables you to
select a location in which to install the driver.
6 Check the "CD-ROM drive" box and uncheck all other items. Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the USBdrv_ directory of the CD-ROM
drive (such as D:\USBdrv_\) and continue the installation.
n
When using the Windows 98, specify the USBdrv_ directory of the
CD-ROM drive (such as D:\USBdrv_\) and continue the installation.
7 When the system detects the driver on the CD-ROM and is ready for
installation, it displays the following screen.
Make sure that the "YAMAHA USB MIDI Driver" is listed, and click
[Next]. The system starts the installation.
8 When the installation is complete, the following screen appears. Click
[Finish].
n
Some computers may take about ten seconds or more to show this
screen after the installation is complete.
Windows 98
Windows Me
The driver has been installed.
Installing the driver on a Windows 2000
system
1 Start the computer and use the "Administrator" account to log into Windows
2000.
2 Select [My Computer | Control Panel | System | Hardware | Driver Signing |
File Signature Verification], and check the radio button to the left of "Ignore -
Install all files, regardless of file signature" and click [OK].
3 Insert the included CD-ROM into the CD-ROM drive.
4 Make sure the POWER switch on the MOTIF-RACK is set to OFF and use
the USB cable to connect the USB terminal of the computer (or the USB
hub) to the USB terminal of the MOTIF-RACK. When the MOTIF-RACK
is turned on, the computer automatically displays the "Found New
Hardware Wizard." Click [Next].
5 Check the radio button to the left of "Search for a suitable driver for my
device. (Recommended)." Click [Next].
The window that appears enables you to select a location in which to install
the driver.
6 Check the "CD-ROM drives" box and uncheck all other items. Click [Next].
n The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the "USBdrv2k_" directory of the CD-
ROM drive (such as D:\USBdrv2k_\) and continue the installation.
7 When the installation is complete, the system displays "Completing the
Found New Hardware Wizard." Click [Finish].
n
Some computers may take about ten seconds or more to show this
screen after the installation is complete.
8 Restart the computer. The driver has been installed.
6